Foot Dimmer Switch with ON/OFF & Night Location Black 60-300W Incandescent/Halogen bulbs only

Electronic Dimmer (Table or Floor) for Incandescent Lamps.

Leading Edge dimmer: For incandescent/halogen filament bulbs ONLY - NOT suitable for LED lamp bulbs, 12v/low voltage lighting systems, transformers or fluorescent lights.

IMPORTANT SAFETY INFORMATION: Dimmer has a 240v output - NEVER connect to 12v lamp/light fittings or those that use a transformer as these can severely restrict the flow of current, which can build-up heat in the dimmer's electronics - this is the dimmer being misused, not a defective dimmer.

IMPORTANT SAFETY INFORMATION: Electrical INPUT and OUTPUT direction MUST be observed - NEVER connect INPUT to OUTPUT

• Rated for incandescent lamps¬†between a total output of 60-300 watts
• Lamp can be switched off at favourite setting using the on/off button
• Dimmer level is set by using the slider
• Convenient night location red diode to assist finding in the dark
• Size: 68mm wide x 130mm long x 25mm high (plus switch and slider)
• 220-240v AC, 50/60Hz ONLY
• For use with 2 or 3 core flex 0.75mm2 max
• Includes wiring diagram/fitting instructions

BEFORE INSTALLATION or replacing the fuse (T2.5Ah 250V), light should be disconnected from electrical supply

Never connect different/higher loads than those indicated

WARNING: ELECTRICITY CAN KILL. INSTALLATION REQUIRES TECHNICAL & ELECTRICAL COMPETENCY - IF IN ANY DOUBT CONSULT A QUALIFIED ELECTRICIAN