Switch Conversion Cover Plate - No Wiring Needed

Designed to fit over a mainstream UK white plastic light switch no larger than 90x90x10mm - please check dimensions before ordering

• External size: 96mm x 96mm / 3.78" x 3.78"
• Depth approx: 10mm / 0.4"
• Switch aperture: 40mm x 35mm / 0.79" x 1.37"
• Screw hole centres: 60mm / 2.36"
• Matching screws supplied (25mm / 1")
• Easy to fit - remove screws from existing switch, add cover, replace using new screws.
• Made in the UK

Transform your existing plain white plastic switch in minutes into an expensive looking metal finish switch. No re-wiring necessary.

Changing switches to suit your décor can be very expensive. By installing a variety of ElekTek decorative cover plates, you will be able to rejuvenate all your old plastic switches at a fraction the cost of installing new decorative switches.

Should only be fitted to switches correctly mounted to a standard earthed metal wall box.

HINTS & TIPS

Prior to installing the decorative cover plate, clean the area of the existing switch plate that will be left exposed, with a proprietary cleaner or methylated spirits.

Before installing, switch off electricity at mains.

WARNING - ELECTRICITY CAN KILL - IF IN ANY DOUBT CONSULT A QUALIFIED ELECTRICIAN